Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.

Connectivity: 3-pin male/female XLR connector.

Powering: 48 Volts according toIEC 61938.

Slim design allows for easy placement in the studio or on stageįor loss-free and reliable signal connection High-quality finish ensures a great look for many years SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISHĮfficient rejection of any electrical interference and noise Providing a robust +28dB of gain, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly.

drives long cable runs and can reduce susceptibility to RF interference, buzz & hum The DM1 DYNAMITE is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier.

provides +28dB output independent of load impedance or cable length.

transformerless design for pristine sound quality.

state of the art electronics and high-grade FETs provide supremely low noise.

provides significantly improved level to your mic preamp for proper gain staging.

gain stays consistent regardless of connected load.

the perfect way to boost the signal of a passive microphone.

designed for neutral, balanced sound quality.The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones. Some mics need a LOT of gain - and not all preamps are up to the challenge. Some mics need a LOT of gain - and not all preamps.

The DM1 DYNAMITE: explosive level for all your passive mics. +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD The DM1 DYNAMITE: explosive level for all your passive mics. Dynamite Active Inline Microphone Preamplifier. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Cheap Computer Cables & Connectors, Buy Quality Computer & Office Directly from China Suppliers:sE Electronics DM1 Dynamite 1 Channel Active Inline Preamp. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones – perfect for podcasting, recording, or live sound. Some mics need a LOT of gain – and not all preamps are up to the challenge. SE Electronics DM1 Dynamite Ultra-slim active inline preamp About: sE Electronics DM1 DYNAMITE In-Line Preamp Designed for neutral, balanced sound quality The perfect way to boost the signal of a passive microphone.

Se electronics dm1 dynamite